01 /Wire from coil
For production with material supplied from a coil. Feeding and straightening are configured for the material and finished component requirements.
Exotec · Machines
The right machine.
For your component.
ICM is Exotec’s range of high-speed impact cutting machines. We start with the material you need to cut and the role of the machine in your production. Up to 4 pieces per second. Length tolerance within 0.01 mm. Depending on material, dimensions and machine configuration.
Machine solutions
From wire or bar.
To repeatable quality.
An effective cutting solution involves more than the cut itself. Feeding, straightening, clamping, tooling and discharge need to work together.
01 /
02 /Bar with a magazine
For bar stock, with a magazine and automatic feeding to support a continuous production flow.
03 /Configured for your part
Round stock and profiles have different requirements. Tooling and machine configuration are selected for geometry, material and cut length.
We start with your application.
Send us a drawing or describe your component. We review the requirements and propose a machine configuration.
- Material
- Material grade, condition and hardness where relevant.
- Dimensions
- Diameter or profile, tolerance and stock geometry.
- Finished component
- Cut length, length tolerance and cut surface requirements.
- Production
- Required rate, annual volume and feeding from bar or coil.
The working range, capacity and achievable tolerance are determined for the specific machine and application.
What do you need to cut?
Tell us your material, dimensions, cut length and required production rate. That gives us a good starting point.